Accessories

Key lock for protected access to the display and knurled screws to increase the enclosure's degree of protection. Suitable for installations where it is necessary to increase the display's degree of protection or restrict access to the device controls and settings.

32GB Micro SD Card for the FC400/DT400 data logger function.

Connector kits designed for wiring HYTERM products. Available in specific versions for each device, they allow connection of the inputs, outputs, power supply and interfaces provided by the product.

Flexible flat cable used to connect the FC300 main electronic board to the integrated display board.

USB flash drive containing the firmware required to update FC400. Available in various versions.

Micro USB B to USB A adapter for controller firmware updates.

Expansion module dedicated to the FC300 controller that enables isolated Modbus RTU RS485 communication. Allows the controller to be integrated with BMS systems and supervision devices compatible with the Modbus protocol.

Cable designed for Modbus RTU RS485 connections, configuration (2 x AWG22 + 1 x AWG22). Supplied pre-terminated and ready for wiring, it is available in different lengths to meet installation requirements.

RS232 crossover Null Modem cable, female/female, 1.8 m

USB connection cable designed for updating the SC400 firmware. Allows the controller to be connected to a PC during update operations.

Isolated USB - RS485 converter for PC.

Special lock with metal key for QE1/QE2 electrical panels

Standard triangular lock for QE1/QE2 electrical panels, sizes 1-6.

Standard triangular lock for QE1/QE2 electrical panels, size 7.

Plastic triangular key for QE1/QE2 electrical panels

Yellow/Red operating handle IP65