DT200 is a controller designed for regulating the speed of electronic fans installed on finned-pack heat exchangers. DT200 has been specifically developed for mission critical applications such as datacenters and power generation.
Optimized for limited spaces, it can power 4 single-phase and three-phase EC fans.
Thanks to carefully developed control algorithms, DT200 enables efficient fan group management, reducing energy consumption and increasing efficiency.
Based on a modern platform equipped with a latest-generation processor, it allows local FW updates via the integrated USB port or remotely through GR IIoT gateways.
Thanks to its Bluetooth interface, the free HyCo application allows setting and monitoring DT200 controller variables from Android mobile devices.
| TECHNICAL DATA | |
|---|---|
| Nominal voltage | 230V ±10% 50/60Hz / 400V ±10% 50/60Hz |
| Power consumption | 10VA |
| Electrical connections | Removable screw terminal block pitch 3.81/5 mm |
| Cable section | min 0.5 mm² ÷ max 2.5 mm² min 20 AWG Cu ÷ max 14 AWG Cu |
| OPERATING CONDITIONS | |
|---|---|
| Operating temperature | -20÷50°C – Rh max 85% non-condensing |
| Storage temperature | –35÷85°C – Rh max 85% non-condensing |
| Vibrations | Vibrations <1g (9.8ms2) |
| Degree of protection | IP56 |
| CONNECTIVITY | |
|---|---|
| Serial lines | COM or RS485 BMS |
| Bluetooth | Internal |
| USB | Micro USB |
| DIMENSIONS | |
|---|---|
| Dimensions | 201 × 154 × 154 mm |
| Weight | - |
| INPUTS/OUTPUTS | |
|---|---|
| Analog inputs | 2 configurable inputs (0-10V, 0-20mA, 4-20mA, NTC) |
| Digital inputs | 3 digital inputs (dry contact) All inputs can be configured as NO or NC |
| Analog outputs | 1 analog output 0-10V max 20mA |
| Digital outputs | 1 digital output (NO contact 250V 3A resistive) Output configurable as NO or NC |
| ENCLOSURE | |
|---|---|
| Mounting | Panel mounting |
| Material | GWPLAST 75 technopolymer (Halogen Free) |
| Ball pressure test | 85°C |
| Self-extinguishing | HB (according to UL94) |
| GWFI | 650°C |
| Color | Grey RAL 7035 |
| Cable glands | 10 × M20 |
| STANDARDS | |
|---|---|
| Compliance | 2014/35/EU (LVT – Low voltage) 2014/30/EU (EMC – Electromagnetic compatibility) |
| Reference standards | CEI EN60730 -1, CEI EN60730-2-9 EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4; EN 55014-1, EN 55014-2 |
| PRODUCT CODES | |
|---|---|
| 10.016.00.0002 | DT200 - Speed controller 230Vac 50/60Hz IP56 |
| 10.016.00.0003 | DT200 - Speed controller 400Vac 50/60Hz IP56 |
| TYPE | DOWNLOADABLE DOCUMENT | DATE |
|---|---|---|
| Technical Data Sheet | 12/05/2026 | |
| CE Declaration | 13/05/2026 | |
| UKCA Declaration | 13/05/2026 | |
| Electrical diagram 230V | 06/05/2026 | |
| Electrical diagram 400V | 06/05/2026 | |
| Mechanical drawing | 06/05/2026 |